PENGUJIAN BERAT JENIS DAN PENYUSUTAN BERAT BAHAN UJI KABEL JENIS N2XSRY DAN NA2XSEYBY

Authors

  • Syafriyudin - Jurusan Teknik Elektro, IST AKPRIND Yogyakarta

DOI:

https://doi.org/10.34151/technoscientia.v5i1.526

Keywords:

insulation, mechanical strength, temperatur, berat types

Abstract

Cable channel that serves the electrical energy is the most vulnerable equipment in the installation of security. The occurrence of short circuit in the installation of household is usually caused by bad cable connection or because of damage to cable insulation. To anticipate the damage to cable insulation, required the knowledge of the factors that cause the damage is and how great the influence of these factors on insulation resistance. The effect of temperature can cause the wiring insulation degradation process because it can result in changes in the chemical structure of the material. Degaradasi this process is marked by a decrease insulation resistance, which is characterized by the rapid occurrence of breakdown voltage if the temperature continues to increase. The longer and higher temperature insulation material given the level of damage suffered by the material will also be greater. From the results of testing insulation resistance reduction characteristics can vary from insulating materials d test, depending on the percentage of additive materials are mixed with an insulating material, the degradation process continues over time due to a rise in temperature can cause the wiring insulation becomes stiff and the consequent breakdown voltage to the material will be faster.

References

Abdul Syakur, Sistem Pengukuran Partial Discharge pada Model Void dalam PVC, UNDIP, Semarang. 2008
Bonggas, L. Tobing, Dasar Teknik Pengujian Tegangan Tinggi, Gramedi Pustaka Utama. Jakarta.2003.
IEC, Assesment of the Risk of Damage due to Lightning, International Standard, CEI IEC 1662 First Edition, 1995.
]EC. Pengujian Hot set, IEC 60811-2-1:1986
[5]IEC, Kabel Daya Dengan Insulasi Terekstrusi Dan Kelengkapannya Untuk Voltase Pengenal 1 kV – 30 kV, IEC 60502-1: 2009
Kabelindo, PT, Pengujian Tegangan Medium Voltage AC/DC. Jakarta
Kabelindo, PT, Pengujian Tahanan Isolasi Kabel Medium Voltage. Jakarta
Kabelindo, PT, Pengujian R Penghantar Kabel Medium Voltage. Jakarta
Munandar A., DR, Teknik Tegangan Tinggi, Ghalia, Indonesia. Jakarta, 1983.
]Schufft, W. Powerful frequency-tuned resonant test systems for afterlaying test of 110 kV XLPE cables. 9th ISH Graz, paper 49.86. 1995.
SPLN, Kabel Berisolasi XLPE dan Berselubung PVC, SPLN 43 – 5. 1986
]SPLN, Pengujian Kabel Listrik, SPLN 39-1.1981
SPLN, Pengujian Kuat Tarik (Tensile Strength ) pasal 9 Sub ayat 43, SPLN SPLN 39-1. 1981
[14]Suwarno, Pengaruh Usia Pakai Terhadap Karakteristik Thermal Isolasi Polyvinyl Chloride ( PVC ). Tesis. ITB. 2005

Downloads

Published

18-01-2019

How to Cite

-, S. (2019). PENGUJIAN BERAT JENIS DAN PENYUSUTAN BERAT BAHAN UJI KABEL JENIS N2XSRY DAN NA2XSEYBY. JURNAL TEKNOLOGI TECHNOSCIENTIA, 5(1), 104–108. https://doi.org/10.34151/technoscientia.v5i1.526