MODIFIKASI MEJA KERJA MENURUNKAN BEBAN KERJA PEKERJA KERAJINAN LOGAM DI KABUPATEN TABANAN BALI
DOI:
https://doi.org/10.34151/technoscientia.v2i2.442Keywords:
table modification, workload, ironwork handicraftAbstract
Ironwork industries is the major work for the employee at Tabanan Bali. Export of product could give more income for the goverment and human life. Many of order make them work overtime to fill the target by working overtime. The impact was more stress and cause workload increased, but productivity decreased. An effort to decrease emplo-yee’s workload is one of the program in order to reduce the stress through ergonomic intervention. Ergonomic analysis found that there was work posture problem caused by low of work table sgtation. Improvement of work table station was aim to decrease the workload. This experiment was conducted on January – June 2006 at ironwork handicraft employee at Tabanan Regency. Design of research is pre-post group design and treat-ment by subject. Intervention was done through modification of work table height that was designed based on elbow height. Subject were 30 skill employee from 6 workshops. Data assessed were heart rate, elbow height, work heart rate using 10 pulse method and ana-lyzed by t-test. The result showed that an impact of table modification to decreased of workload (p > 0.05). The magnitude of impact was 27.26 %. It,s suggested that the em-ployee should use table modification regularly through adaptattion process for optimum effect.
References
Anonim, 2004a. Monografi Departemen Perindustrian dan Perdagangan. In www. dprin.go. Id/Ind/Statistik. Akses 20 November.
Anonim, 2004b. Realisasi Ekspor Hasil Kerajinan Bali. Harian Nusa. Senin, 23 Agustus 2004, h. 4.
Andewi, P.J., 1999. Perbaikan sikap kerja dengan memakai kursi dan meja kerja yang sesuai dengan data antropometri pekerja dapat meningkatkan produktivitas kerja dan mengurangi gangguan sistem musculoskeletal pekerja perusahaan MI Kediri Tabanan. Thesis. Denpasar: Program Pascasarjana Universitas Udayana.
Dul, J., B. Weerdmeester, 1993. Ergonomic for Beginners A Quick Reference Guide. London: Taylor & Francis.
Ferreira dan Hignett (2005). Reviewing amblance design for clinical safety and paramedic safety. Applied Ergonomic. 36:97-105.
Grandjean, E., Kroemer, 2000. Fitting the Task to the Human. A textbook of Occupational Ergonomics. 5th edition. Piladelphie : Taylor & Francis.
Gupta, N., K. Diallo, P. Zurn, M.R. Dal Poz, 2003. Assessing human resources for health: what can be learan from labour force survey Hum Resour Health. 1(1):5.
Guyton, A.C dan J.E. Hall, 2000. Fisiologi Ke-dokteran, Irawati Setiawan (ed). Edisi 10. Jakarta : Penerbit Buku Kedokteran EGC.
Haney, L.L., 2003. Physical streses related to the safe handling of residents. Director. Fall;11(4):151-3.
Hendrick, H.W. 2002. Good Ergonomic is Good Economics. Proseding Ergonomi, Internasional Seminar on Ergonomics.
Manuaba, A. 1998a. Bunga Rampai Ergonomi, Vol I. Program Studi Ergonomi – Fisiologi Kerja Universitas Udayana.
Manuaba, A. 1998b. ‘Task demands, Working Capacity and Performance A Holistic system approach in manual material handling’. Ergonomi dan Materi Khusus. Proceeding Seminar Ergonomi, Denpasar : Program Studi Ergonomi - Fisiologi Kerja Universitas Udayana, 18 November.
Manuaba, A. 1998c. Bunga Rampai Ergonomi, Vol II. Program Studi Ergonomi – Fisiologi Kerja Universitas Udayana.
Manuaba, A., 1999a. Ergonomi meningkatkan kinerja tenaga kerja dan perusahaan. Proseding Simposium dan Pameran Ergonomi Indonesia 2000. Bandung : 18 – 19 November.
Manuaba, A. 1999b. Penerapan pendekatan ergonomi partisipasi dalam meningkatkan kinerja industri. Proseding Seminar Nasional Ergonomi–Reevaluasi Penerapan Ergonomi dalam Meningkatkan Kinerja Industri. Surabaya : 23 November.
Manuaba, A. 2003a. Organisasi Kerja, Ergonomi dan Produktivitas. Seminar Nasional Ergonomi, Jakarta, 9–10 April.
Manuaba, A. 2003b. Holistic design is a must to attain sustainable product, The National Seminar on Product Design and Development Industrial Engineering UK Maranatha, Bandung, 4 – 5 Juli.
Manuaba, A. 2004a. Pengaruh Lingkungan terhadap ManMachine Environment. Personal Information. Program Pascasarjana Universitas Udayana. Denpasar.
Manuaba, A. 2004b. SHIP Approach. Personal Information. Program Pascasarjana Universitas Udayana. Denpasar.
McAtamney, L., E.N. Corlett, 1992. Reducing the risk of work related upper limb disorders–A guide and methods. Nottingham : Institute for Occupational Ergonomics, University of Notting-ham. Available from www.rula.co.uk. Accesed 12 Januari 2006.
Netrawati, IGA, S, Hadi, Tarwaka, 2001. Sarana kerja yang tidak ergonomis meningkatkan keluhan muskuloskeletal pada pekerja garmen di Bali. Proseding Seminar Nasional XII Ikatan Ahli Ilmu Faal Indonesia. Malang, 27 – 28 Oktober.
Ore, T. 2003. Manual handling injury in a disability services setting. Applied Er-gonomics. January; 34 (1): 89-94.
Sutajaya, 1999. Perbaikan proses kerja mengurangi beban kerja dan gangguan pada sistem muskuloskeletal pematung di Peliatan Ubud Gianyar. Proseding Simposium dan Pameran Ergonomi Indonesia 2000. Bandung : 18 – 19 November.
Sutjana, I D P., 2000. Penerapan Ergonomi meningkatkan Produktivitas dan Kesejahteraan Masyarakat. Orasi Ilmiah Pengukuhan Guru Besar Fisiologi Universitas Udayana. Denpasar, 11 November.
Wiartana, G., 1998. ‘Perbaikan Meja Tindakan di UGD Mengurangi Keluhan Sakit Pinggang Petugasnya’: Prosiding Seminar Nasional Sehari Ergonomi dan Olahraga, Jakarta, 18 Nopember, h. 81–95.
