PENENTUAN JUMLAH PERSEDIAAN SUKU CADANG RANTAI GARU MESIN PENGGILING TEBU BERDASARKAN TINGKAT KEKRITISAN KOMPONEN MODEL ABC MENGGUNAKAN SPARE PART REQUIREMENT NOMOGRAPH
DOI:
https://doi.org/10.34151/technoscientia.v3i1.435Keywords:
Reliability, maintainability, availability, spare-part requirement nomographAbstract
- Madukismo is one of the companies operating in the area of agroindustry with sugar as the main product. In order to exist, the company needs to increase the work effectiveness and efficiency in using the production machines through the planning of maintenance scheduling in order that the machines or units that are going to be used can be operated well, and work properly.The aim of this research is to analyze level requirement of amount of spare-part optimal with Sparepart requirement nomograph approach. This effort is able to increase high production quality, availability and reliability by maximizing equipments age, and also exploiting of effective maintenance. Based on the research result shows that the maintenance of chain eye component, it should be differentiated, basically, on the maintenance time. Determination of feed amounts at "t" periods with level of protection equal to 95% depict amount of requirement of accesses for chain component that availed counted 30 units.
References
Charles, E, E, 1997, An Introduction to Reliablity and Maintanability Engineering, Mc Graw-Hill, Singapore.
Gasperz, V, 1992, Analisis Sistem Terapan Berdasarkan Pendekatan Teknik Industri, edisi pertama, Tarsito, Bandung.
Harjanto, E, 1996, Manajemen Produksi dan Operasi, Jakarta
Maolana, D, 2007, Analisis Biaya Perawatan Komponen Mesin dengan Penyediaan Suku Cadang pada Departemen Finishing CV. Banjar Jaya, Skripsi, Teknik Industri, IST. AKPRIND, Yogyakarta.
Sodikin, I, 2008, Penentuan Interval Perawatan Preventif Komponen Elektrik dan Komponen Mekanik yang Optimal pada Mesin Excavator Seri PC 200-6 dengan Pendekatan Model Jardine, Jurnal Teknologi, Vol 1 No. 2, Desember 2008, ISSN: 1979-3405, IST AKPRIND, Yogyakarta.
Sukmono, W, 2005, Pengujian Distribusi dan Menentukan Jumlah Persediaan Maksimum & Minimum dari Komponen yang Mengalami Kerusakan dan Batas Pemesanan Kembali, Skripsi, Teknik Industri, IST. AKPRIND, Yogyakarta.
Yamit, Z, 1999, Manajemen Persediaan, Ekonosia UII, Yogyakarta.
Gasperz, V, 1992, Analisis Sistem Terapan Berdasarkan Pendekatan Teknik Industri, edisi pertama, Tarsito, Bandung.
Harjanto, E, 1996, Manajemen Produksi dan Operasi, Jakarta
Maolana, D, 2007, Analisis Biaya Perawatan Komponen Mesin dengan Penyediaan Suku Cadang pada Departemen Finishing CV. Banjar Jaya, Skripsi, Teknik Industri, IST. AKPRIND, Yogyakarta.
Sodikin, I, 2008, Penentuan Interval Perawatan Preventif Komponen Elektrik dan Komponen Mekanik yang Optimal pada Mesin Excavator Seri PC 200-6 dengan Pendekatan Model Jardine, Jurnal Teknologi, Vol 1 No. 2, Desember 2008, ISSN: 1979-3405, IST AKPRIND, Yogyakarta.
Sukmono, W, 2005, Pengujian Distribusi dan Menentukan Jumlah Persediaan Maksimum & Minimum dari Komponen yang Mengalami Kerusakan dan Batas Pemesanan Kembali, Skripsi, Teknik Industri, IST. AKPRIND, Yogyakarta.
Yamit, Z, 1999, Manajemen Persediaan, Ekonosia UII, Yogyakarta.
Downloads
Published
18-01-2019
How to Cite
Sodikin, I. (2019). PENENTUAN JUMLAH PERSEDIAAN SUKU CADANG RANTAI GARU MESIN PENGGILING TEBU BERDASARKAN TINGKAT KEKRITISAN KOMPONEN MODEL ABC MENGGUNAKAN SPARE PART REQUIREMENT NOMOGRAPH. JURNAL TEKNOLOGI TECHNOSCIENTIA, 3(1), 36–45. https://doi.org/10.34151/technoscientia.v3i1.435
Issue
Section
Articles
