PENGARUH SANDWICH LAMINATED COCO MAT DAN CHOPPED STRAND MAT TERHADAP KEKUATAN MATERIAL KOMPOSIT
DOI:
https://doi.org/10.34151/technoscientia.v2i1.419Keywords:
Coco Mat, Chopped Strand Mat, CompositeAbstract
The application of coco fibre is widely open. In rural area, as a main source of coco fibre, the fibre IS only used for cooking and family products. As the technology development, how coco fibre can be applied as a part of composites materials. If it compound with other specific components, we can produce a new material with better mechanical properties. In this research, coco fibre with 0,2% wetness, compound with latex then pressed to get a coco mat with 2 mm thickness. Coco mat then formed with chopped strand mat to get a sandwich laminate composite. The original tensile strength of coco mat is 2,47 kgf/mm2 , and it will increased to 12,93 kgf/mm2 if it formed as sandwich laminate coco fibre. The tensile strength improves about 80, 90%.
References
ASTM D 3039-93, 1994, ASTM Standard and Literature References for Composit Material.
ASTM D 790-92, 1994, ASTM Standard Test methodes for Flexural Properties of Unreinforcesd and Reinforced Plastics and Electrical Materials.
Dorel, F. & Hartomo A.J., 1995, Bahan Polimer Konstruksi Bangunan, PT. Gramedia Pustaka Utama, Jakarta.
Germanischer L., 1995, High Speed Craft, Rule for the Clasification and Construction Volume 1, Southampton, England.
Germanischer L, 1998, Rule for Clasification and Constuction Ship Technology, West Germany.
Gibson, F. & Ronald, F., 1994, Principles of Composite Material Mechanic, Mc Graw Hill. Inch.
Gougeon, B., 1985, Boat Construction: Wood & West System Materials, Printed by Pendell Printing Inc., Midland MI.
Groover, P.M., 2000, Fundamental of Modern Manufacturing Materials, Process and System, Prentice Hall, New Jersey.
Gurdal, 1999, Design and Optimization of Laminated Composite Material, John Wiley & Sons Inc., New York.
Hilargo, C.J., 1984, Glass Reinforced Polyester System Meterial Technology Series Volume 14, Pennsylvania.
Hyer, M.W., 1997, Stress Analysis of Fibre Reinforced Composite Material, Mc Graw Hill, New York.
Jones,R.M.,1987, Mechanics of Composite Materials, Mc GrawHill, New York. USA.
Sugiyanto & Tarkono, 2009, Pengaruh Komposisi Partikel Tempurung Kelapa Sawit terhadap Sifat Mekanik Komposit Partikel, Seminar Nasional Industrial Services 2009, 29 April 2009, Halaman 138 – 144.
Surdia, T., dkk., 2002, Pengetahuan Bahan Teknik, Pradnya Paramita, Jakarta.
Tarkono, 2005, Penggunaan Laminasi Kayu dan Bambu untuk Komponen Balok Pada Kapal Kayu, Tesis, Institut Teknologi Sepuluh Nopember.
Tarkono, 2006, Analisa Batasan waktu Optimum Dalam Produksi Laminasi Fibre Glass (GFRP), POROS Jurnal Ilmiah Teknik Mesin Universitas Tarumanegara Jakarta, Vol. 9 Nomor 1, 1 Januari 2006, Halaman 28 -39.
Tarkono, 2006, Perilaku Material Laminasi Bambu – Kayu Pada Industri Kelautan, Jurnal OPTIMUM Jurusan Teknik Industri Universitas Muhammadiyah Malang, Volume 7 No. 1 Februari 2006, Halaman 60 – 70.
Tarkono, 2006, Kajian Teknologi Produksi Material Laminasi Kayu Bambu Berbentuk Balok Sebagai Bahan Alternatif Bangunan Kapal Kayu, Jurnal Ilmiah Desain & Konstruksi Universitas Gunadarma, Volume 5 No. 1 Juni 2006, Halaman 36 – 46.
Tarkono, 2007, Pemanfaatan Limbah Industri Kelapa Sawit untuk Bahan baku Komposit, Proseding Seminar Hasil-hasil Penelitian dan Pengabdian Kepada Masyarakat Universitas Lampung, 23 November 2007, Hal 64 – 71.
Vlack, L.H. & Sriati, D., 2000, Ilmu dan Teknologi Bahan, Penerbit Erlangga, Jakarta.
ASTM D 790-92, 1994, ASTM Standard Test methodes for Flexural Properties of Unreinforcesd and Reinforced Plastics and Electrical Materials.
Dorel, F. & Hartomo A.J., 1995, Bahan Polimer Konstruksi Bangunan, PT. Gramedia Pustaka Utama, Jakarta.
Germanischer L., 1995, High Speed Craft, Rule for the Clasification and Construction Volume 1, Southampton, England.
Germanischer L, 1998, Rule for Clasification and Constuction Ship Technology, West Germany.
Gibson, F. & Ronald, F., 1994, Principles of Composite Material Mechanic, Mc Graw Hill. Inch.
Gougeon, B., 1985, Boat Construction: Wood & West System Materials, Printed by Pendell Printing Inc., Midland MI.
Groover, P.M., 2000, Fundamental of Modern Manufacturing Materials, Process and System, Prentice Hall, New Jersey.
Gurdal, 1999, Design and Optimization of Laminated Composite Material, John Wiley & Sons Inc., New York.
Hilargo, C.J., 1984, Glass Reinforced Polyester System Meterial Technology Series Volume 14, Pennsylvania.
Hyer, M.W., 1997, Stress Analysis of Fibre Reinforced Composite Material, Mc Graw Hill, New York.
Jones,R.M.,1987, Mechanics of Composite Materials, Mc GrawHill, New York. USA.
Sugiyanto & Tarkono, 2009, Pengaruh Komposisi Partikel Tempurung Kelapa Sawit terhadap Sifat Mekanik Komposit Partikel, Seminar Nasional Industrial Services 2009, 29 April 2009, Halaman 138 – 144.
Surdia, T., dkk., 2002, Pengetahuan Bahan Teknik, Pradnya Paramita, Jakarta.
Tarkono, 2005, Penggunaan Laminasi Kayu dan Bambu untuk Komponen Balok Pada Kapal Kayu, Tesis, Institut Teknologi Sepuluh Nopember.
Tarkono, 2006, Analisa Batasan waktu Optimum Dalam Produksi Laminasi Fibre Glass (GFRP), POROS Jurnal Ilmiah Teknik Mesin Universitas Tarumanegara Jakarta, Vol. 9 Nomor 1, 1 Januari 2006, Halaman 28 -39.
Tarkono, 2006, Perilaku Material Laminasi Bambu – Kayu Pada Industri Kelautan, Jurnal OPTIMUM Jurusan Teknik Industri Universitas Muhammadiyah Malang, Volume 7 No. 1 Februari 2006, Halaman 60 – 70.
Tarkono, 2006, Kajian Teknologi Produksi Material Laminasi Kayu Bambu Berbentuk Balok Sebagai Bahan Alternatif Bangunan Kapal Kayu, Jurnal Ilmiah Desain & Konstruksi Universitas Gunadarma, Volume 5 No. 1 Juni 2006, Halaman 36 – 46.
Tarkono, 2007, Pemanfaatan Limbah Industri Kelapa Sawit untuk Bahan baku Komposit, Proseding Seminar Hasil-hasil Penelitian dan Pengabdian Kepada Masyarakat Universitas Lampung, 23 November 2007, Hal 64 – 71.
Vlack, L.H. & Sriati, D., 2000, Ilmu dan Teknologi Bahan, Penerbit Erlangga, Jakarta.
Downloads
Published
01-08-2009
How to Cite
-, T. (2009). PENGARUH SANDWICH LAMINATED COCO MAT DAN CHOPPED STRAND MAT TERHADAP KEKUATAN MATERIAL KOMPOSIT. JURNAL TEKNOLOGI TECHNOSCIENTIA, 2(1), 117–128. https://doi.org/10.34151/technoscientia.v2i1.419
Issue
Section
Articles
