PETA KENDALI ATRIBUT UNTUK MENGIDENTIFIKASI KECACATAN PRODUK FURNITURE DI PT. ISI
DOI:
https://doi.org/10.34151/technoscientia.v12i2.2683Keywords:
Center Line (CL), Defective product, Lower Control Limit (LCL), Quality control, Upper Control Limit (UCL)Abstract
PT. ISI is one of the furniture industries in Bantul area. In that area there are a lot of advanced furniture industries. To compete with similar company, we need a perfect product quality to gain the trust of consumer. Thus good quality control effort is needed by PT. ISI to be able to compete and continue to grow. The problems from this research that is what type of defective product that occur and how the quality of the final product at PT. ISI. The steps in this research are first collecting defect product data, calculating Center Line (CL), Upper Control Limit (UCL) and Lower Control Limit (LCL) and then identifying cause and effect of defects using a fishbone diagram. There are five types of defects in the production process of PT ISI, the five types of defects are broken or cracked, the color is not appropriate, scratch, impact former and lamination. The implementation of the final product quality control at PT ISI is still within the control limit, this can be seen in the control chart graph which shows no deviation that occur from the upper control limit and the lower control limit.
References
Gaspersz, V., 1997, Manajemen Kualitas Penerapan Konsep-konsep Kualitas dalam Manajemen Bisnis Total, Jakarta: PT. Gramedia Pustaka Utama.
Heizer, J. dan Render, B., 2006, Operations Management, Edisi terjemahan, Jakarta: Salemba Empat.
Khomah, I. Dan Rahayu, E. S., 2012, Aplikasi Peta kendali P Sebagai Pengendalian Kualitas Karet di PTPN Kerjoarum, Jurnal Agraris, Volume 2, Halaman 12-24.
Purba, H. H., 2008, Diagram Fishbone dari Ishikawa, Jakarta: Mediyatama Sarana Perkasa.
Tampubolon, M. P., 2004, Manajemen Operasional, Jakarta: Ghalia Indonesia.
Wibowo, H., Sulastri, dan Arifudin, A., 2017, Analisis Peta Kendali Atribut dalam Mengidentifikasi Kerusakan pada Produk Batang Kawat PT. Krakatau Steel Tbk, Seminar Nasional Teknik Industri, 13-14 Agustus 2017, Halaman 228-235.
Yani, A., S., 2018, Analisis Pengawasan Kualitas Produk dengan Menggunakan Metode P-Chart untuk Meminimalkan Tingkat Kerusakan Produk pada UKM Sepatu, Jurnal Online Nasional Universitas 17 Agustus 1945 Jakarta, Volume 2, Halaman 54-64.
