SISTEM MONITORING DETAK JANTUNG MENGGUNAKAN MIKROKONTROLER

Authors

  • Gatot Santoso Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta
  • Subandi - Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta
  • Slamet Hani Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta
  • Agung Wahyu Nugroho Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta

DOI:

https://doi.org/10.34151/technoscientia.v12i1.2146

Keywords:

Battery, ECG signal, Heart, Microcontroller

Abstract

The heart is a human organ that has a vital function. Small flaws in the heart organ can have a big effect on our body. In general, our heart beats around 60-100 times in one minute. If you exceed 100 times and less than 60 times every minute means your heart is experiencing an abnormal beat. Because some patients who suffer from heart need the automation of early detection. The development of electronic technology makes it possible for heart examinations to be carried out by the patient himself.

This research aims to design and build a device to monitor heart rate using a microcontroller. Noise suppression on the ECG signal, heart rate data that has been detected and processed will be compared with normal and abnormal values ​​of the heartbeat. Furthermore, the microcontroller will determine how the heart condition is detected. From the results of the study the heart rate monitoring system using a microcontroller input voltage of 3.7 V DC was changed by the step up module to 5 V DC with a magnitude of error percentage of 0.863% and a charger module used to charge batteries with 4.2 V DC voltage and the magnitude of the error percentage amounted to 0.119%. The amped pulse sensor has an output voltage value of 2.4 V when it is relaxed and 2.6 V when it is beat, and this sensor has a constant and significant output voltage value in accordance with the rhythm of the heartbeat. The heart rate monitoring tool that is made can measure accurately and precisely, because it has a fairly small average error value of 1,727%.

References

Adi, P. D. P, Niswar, M., dan Ilham, A. A., 2012, Kinerja Jaringan Sensor Nirkabel IEEE 802.15.4 untuk Monitoring Denyut Nadi Pasien, Program Studi Teknik Informatika, Fakultas Teknik, Universitas Satya Wiyata Mandala, 1-13.
Figueredo, M. V. M. dan Dias, J. S., 2004, Mobile Telemedicine System for Home Care and Patient Monitoring, Proceedings of the 26th Annual Conference of the IEEE EMBS, 04: 3387-3390.
Harahap, A. N. dan Perangin-angin, B., 2003, Sistem Pengukuran Detak Jantung Manusia Menggunakan Media Online dengan Jaringan Wi-Fi Berbasis PC, Fisika Instrumentasi, FMIPA, USU: 1-7.
Harsono, B., Liman, J., dan Djohan, N., 2012, Rancang Bangun Alat Pemantau Laju Detak Jantung Saat Latihan Fisik, Jurnal Tekin dan Ilmu Komputer, 01(04): 338-346.
Ho, S., Noh, dan Seo-Young, 2015, Multiple Heart Rates Monitoring using Smart Phones, International Journal of Bio-Science and Bio-Technology, 7(6): 239-248.
Istepanian, R. S. H., Woodward, B., dan Richards, C. I., 2000, Advances in Telemedicine Using Mobile Communications, Departement of Electronic and Computer Engineering. 1-4.
Kusuma R. W., Ridha I., Rianto, Y., dan Swelandiah, E. P., 2014, FPGA Based Heartbeats Monitor with Fingertip Optical Sensor, International Journal of Computer Science, Engineering and Information Technology (IJCSEIT), 4 (5): 1-9.
Mallick, B. dan Patro, A. K., 2016, Heart Rate Monitoring System Using Finger Tip Through Arduino and Processing Software, International Journal of Science, Engineering and Technology Research (IJSETR), 5(1): 84-89.
Mamun, A. L., Ahmed, N., Alqahtani, M., Altwijri, O., Rahman, M., Ahmad, N. U., Rahman, S. A. M. M., Ahmad, R. B., dan Sundaraj, K., 2014, A Microcontroller-Based Automatic Heart Rate Counting System From Fingertip, Journal of Theoretical and Applied Information Technology, 62 (3): 597-604.
Memon, T. D., Chowdhry, B. S., dan Memon, M. S., 2004, The Potential of Telemedicine System: Approach Towards a Mobile Doctor, National Conference on Emerging Technologies, 106-111.
Nisha, P. K. dan Vinita, Y., 2015, Heart Rate Monitoring and Data Transmission via Bluetooth, International Journal of Innovative and Emerging Research in Engineering, 2(2): 99-105.
Pamungkas, R., Susanto, E., dan Sarwoko, M., 2015, Perancangan Sistem Monitoring Sinyal Kelistrikan Jantung, Jumlah Tetes Infus, dan Suhu Tubuh Secara Wirelessly, Prodi Teknik Elektro, Fakultas Teknik Elektro, Universitas Telkom, 1-8.
Pandiyan, E. M. S., Selvan, M. T., Hussian, M. S., dan Velmathi, G. 2014, Force Sensitive Resistance Based Heart Beat Monitoring For Health Care System, International Journal of Information Sciences and Techniques (IJIST), 4(3): 11-16.
Rahardian, H. dan Arifin, Z., 2016, Pemrosesan Data Pulse Sensor Amped pada Rancangan Sistem Informasi Dokter dan Pasien, JTET, 5(1): 24-31.
Sali, S., Durge, P., Pokar, M., dan Kasge, N., 2013, Microcontroller Based Heart Rate Monitor, International Journal of Science and Research (IJSR), 5(5): 1169-1172.
Samadikun, S., Rio, S. R., dan Mengko, T., 1989, Sistem Instrumentasi Elektronika, Bandung: Institut Teknologi Bandung.
Sari, T. P., Dawirson, dan Aisuwarya, R. 2015, Sistem Monitoring Denyut Jantung Menggunakan Mikrokontroler Arduino dan Komunikasi Xbee, Seminar Nasional Sains dan Teknologi, 016: 1-9.
Umar, A., Rasaily, D., dan Sharma, P., 2016, Design of Heart Rate Monitor Through Fingertip, International Journal of Engineering Trends and Technology (IJETT), 32 (4): 188-190.
Wicaksono, W. dan Somawirata, I. K., 2011, Perancangan dan Pembuatan Alat Penghitung Detak Jantung Dengan Bipolar Standart Lead Berbasis Mikrokontroler ATMEGA 8535, Jurnal Elektro ELTEK, 2(2): 183-188.

Downloads

Published

01-08-2019

How to Cite

Santoso, G., -, S., Hani, S., & Nugroho, A. W. (2019). SISTEM MONITORING DETAK JANTUNG MENGGUNAKAN MIKROKONTROLER. JURNAL TEKNOLOGI TECHNOSCIENTIA, 12(1), 77–84. https://doi.org/10.34151/technoscientia.v12i1.2146