PERANCANGAN SISTEM AKSES KUNCI ELEKTRONIS PADA KOTAK PENYIMPANAN MEMANFAATKAN E-KTP DAN TEKNOLOGI RFID

Authors

  • Slamet Hani Jurusan Teknik Elektro, Institut Sains &Teknologi AKPRIND Yogyakarta
  • Gatot Santoso Jurusan Teknik Elektro, Institut Sains &Teknologi AKPRIND Yogyakarta
  • Fahmi Bilbirril Hikam Jurusan Teknik Elektro, Institut Sains &Teknologi AKPRIND Yogyakarta

DOI:

https://doi.org/10.34151/technoscientia.v12i1.2145

Keywords:

Arduino Nano solenoid DC, E-KTP, RFID, Storage box

Abstract

Storage box has an important function which is often used to store valuables. In general, the locking system in a storage box is still conventional or manual, making it less practical. In addition, the level of security of the storage box must also be good. As a solution to both of the above, then it is necessary to design an electronic lock system in the storage box by using Electronic Identity Card (E-KTP) as the key access. In the E-KTP embedded chip that contains data that is different from one another. So, with these differences E-KTP can be used as a key.

This electronic key system utilizes Radio Frequency Identification (RFID) technology, E-KTP as RFID tags, and Arduino Nano microcontroller. The UID (unique identity) data on the E-KTP will be read by the MFRC522 RFID reader. The data is then used as identification of certain E-KTPs that can be used to access electronic keys (in the form of DC solenoids) in the storage box. The results of the system control and output are in accordance with the plan. The E-KTP registered in the system can be used to access the storage box key. The voltage on the power supply and the Arduino Nano is in accordance with the requirements and in the test, the voltage error is not more than 10%, the MFRC522 RFID Reader is able to read the UID E-KTP data with reading distance 0 mm - 2 mm.

References

Akbar, M. & Effendy, I. 2017. Implementasi Aplikasi Kehadiran Perkuliahan di Kelas Menggunakan Pembaca RFID pada E-KTP. Jurnal Ilmiah MATRIK, 19(2), 151-160. Palembang: Universitas Bina Darma.
Arduino, Arduino Nano, https://store.arduino.cc/usa/arduino-nano, diakses 1 April 2019.
Benny, Rama, M. A., dan Dinda, N. R., 2016, Kunci Pengaman Brankas Menggunakan PIN dan RFID, Jurnal Poli-Teknologi, 15(2).
Farezi, R. M., 2019, Prototipe Keamanan Brankas Berbasis Arduino dan Android. Skripsi. Surakarta: Universitas Muhammadiyah Surakarta.
Farooq, U., ul Hasan, M., Amar, M., Hanif, A., dan Asad, M. U., 2014, RFID Based Security and Access Control System. International Journal of Engineering and Technology, 6(4): 309.
Priyambodo, S., Kurnianti, E., dan Novianta, M. A., 2017, Prototype Komunikasi Data pada ERP (Electronic Road Pricing) Menggunakan Teknologi RFID (Radio Frequency Identification). Jurnal Teknologi, 10(2): 80-85.
Puasandi, T., Rif'an, M., dan Nurussa’adah, 2014, Sistem Akses Kontrol Kunci Elektrik Menggunakan Pembacaan E-KTP. Jurnal Mahasiswa TEUB, 2(3).
Santoso, G. dan Hani, S., 2018, Perancangan Sistem Doorlock Menggunakan RFID dan Android Berbasis Arduino Nano. Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST). Yogyakarta: 15 September 2018.
Supriyanto, W. dan Muhsin, A., 2008, Teknologi Informasi Perpustakaan, Yogyakarta: Kanisius.
Syahwil, M., 2013. Panduan Mudah Simulasi dan Praktek Mikrokontroler Arduino. Yogyakarta: Andi Offset.

Downloads

Published

01-08-2019

How to Cite

Hani, S., Santoso, G., & Hikam, F. B. (2019). PERANCANGAN SISTEM AKSES KUNCI ELEKTRONIS PADA KOTAK PENYIMPANAN MEMANFAATKAN E-KTP DAN TEKNOLOGI RFID. JURNAL TEKNOLOGI TECHNOSCIENTIA, 12(1), 68–76. https://doi.org/10.34151/technoscientia.v12i1.2145