KENDALI KECEPATAN MOTOR PADA ROBOT DENGAN EMPAT RODA OMNI MENGGUNAKAN METODE PID

Authors

  • Aryono Priyambudi Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta
  • Beny Firman Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta
  • Samuel Kristiyana Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta

DOI:

https://doi.org/10.34151/technoscientia.v10i2.104

Keywords:

Manual tuning, Omni-wheel, PID, Wheeled robot

Abstract

In this research has been developed a system to conrol robot which have four wheel as a base for wheeled robot contest. The type of wheel is omni-wheel, they are shapeed with same distance each other. This system comonly have no stright movement and have no consistent aim-face of the robot in open loop control. The control system in this research use PID method to control the speed of each wheel. It use to make robot can move strightly and consistent of aim-face of the robot. The test on this system show that rotation speed of each wheel are equal to set point which set to PID control. With tune the paramater of PID with manual tuning method the system get 2.81% motor speed error. And get 0.66% error of aim-face of robot from forward and backward movement.

References

Amaldi, W., 2016, Ilmu Program, https://ilmuprogram.com/2016/12/17/ arduino-penjelasan-dan-macamma camnya/, diakses 27 September 2017.
Arduino, 2017, Arduino Mega, https://www.arduino.cc/en/Main/ardu ino BoardMega, diakses 26 Juli 2017.
Collins, D., 2015, FAQ: How do magnetic encoders work?, http://www.motion controltips.com/faq-how-do-magnetic-encoders-work/, diakses 27 Juli 2017.
Dynpar, 2017, Magnetic Encoders, https://www.dynapar.com/Technology/ Encoder_Basics/Magnetic_Encoder/, diakses 27 Juli 2017.
Hutahaean, R. Y., 2006, Mekanisme dan Dinamika Mesin, Yogyakarta: Andi.
Kho, D., 2017, Pengertian Optocoupler dan Prinsip Kerjanya, http://teknik elektronika.com/pengertian-optocou pler-fungsi-prinsip-kerja-optocoupler/, diakses 27 Juli 2017.
Ogata, K., 1996, Teknik Kontrol Automatik, Jilid 1, Jakarta: Erlangga.
Pambudi, W. S., 2011, Rancang Bangun 3 Wheels Omni-Directional Mobile Robot Menggunakan Sensor Position Sensitive Device (PSD) serta Sensor Vision dengan Metode Kendali Fuzzy Logic Controller (FLC) untuk Menghindari Halangan.
Pitowarno, E., 2006, Desain, Kontrol, dan Kecerdasan Buatan, Yogyakarta: Andi.
Rochamnto, R. A., 2014, Implementasi Robot Three Omni-Directional Menggunakan Kontroler PID pada Robot Kontes Robot ABU Indonesia (KRAI), Jurnal Universitas Brawijaya, hal. 1-6.
Saputra, A. W., 2014, Kendali Kecepatan dan Posisi pada Mobile Robot yang Menggunakan Triangle Omni-Directional Wheels dengan Metode PID, Journal of Control and Network Systems, Vol. 3, No. 2, hal. 81-89.
Sumanto, M., 1991, Mesin Arus Searah, Edisi ke-2, Yogyakarta: Andi Offset.
Wahyuono, T. A., 2015, Kendali Robot Manual 4WD Mecanum Wheel Berbasis PID dengan Menggunakan ARM-CORTEX M4, Journal of Control and Network Systems, Vol. 4, No.1, hal. 39-45.

Downloads

Published

02-02-2018

How to Cite

Priyambudi, A., Firman, B., & Kristiyana, S. (2018). KENDALI KECEPATAN MOTOR PADA ROBOT DENGAN EMPAT RODA OMNI MENGGUNAKAN METODE PID. JURNAL TEKNOLOGI TECHNOSCIENTIA, 10(2), 209–217. https://doi.org/10.34151/technoscientia.v10i2.104