PERBAIKAN KESEIMBANGAN LlINI PRODUKSI PERAKITAN ELEKTRONIK PT ’X’ DIDUKUNG SISTEM SIMULASI

Authors

  • Yunita Primasanti Universitas Sahid Surakarta
  • Kohar Sulistyadi Universitas AKPRIND Indonesia

DOI:

https://doi.org/10.34151/rekavasi.v12i1.4605

Keywords:

production management, line balancing assembly, simulation system

Abstract

Improving of assignment line balancing at work stations must be use to get increasing effisiency production line. The effisiency of production line can be represented by minimum number of worker to put in production, and minium idle time. The aim of research is to find improving of assembly production line and to achieve the production target into simulation system in line balancing. Line CY.14-XX is one of the production line that proude television with capacity 190 unit per hour. Time work have been measure by time study method. The first condition efficiency of production line is 70 percent with idle time is 191 second or 29 percent, and number of operating workers for producing television using 40 operator. The result of simulation system in production line shows efficiency of production line increase 81 percent with idle time is 115 seconds or 19 percen, and number of operating workers for producting television decreasing 4 operators or using 36 operators. Pursuant on simulation system result that the proposal of improvement line of balancing electronic assembly can be applied to real production system.

References

Andreas Tri Panudju, Bambang Setyo Panulisan, Euis Fajriati, 2018, Analisis Penerapan Konsep Penyeimbangan Lini (Line Balancing) Dengan Metode Ranked Position Weight (RPW) Pada Sistem Produksi Penyamakan Kulit Di PT. Tong Hong Tannery Indonesia Serang Banten

Gasperz, Vincent, 1998, Production Planning and inventory Control, Penerbit Vincent foundation, Bandung.

Galuh Nugrianto, M Syambas Robin, Rizman Diky, Niko Demus,2020, Analisis Penerapan Line Balancing untuk Peningkatan Efisiensi pada Proses Produksi Pembuatan Pagar Besi Studi Kasus: CV. Bumen Las Kontraktor, Bulletin of Applied Industrial Engineering Theory Vol 1, No.2

Heizer, Jay. Dan Barry, Render, 2016. Operations Management Buku 2 edisi ke tujuh (Jakarta:Penerbit Salemba Empat)

Muhamad Andi, 2 Syarifuddin Nasution, 2018, Keseimbangan Lini Perakitan Produk Tipe HD1172 Menggunakan Metoda Heuristik Pada Line Main Assy Iron Di PT. Selaras Citra Nusantara Perkasa, Jurnal Ilmiah Teknologi dan Rekayasa Vol 23 No. 3

Renty Anugerah Mahaji Puteri, Wiwik Sudarwati, 2016, Pengukuran, Line Balancing dan Simulasi Promodel Di PT. Caterpillar Indonesia, Jurnal Integrasi Sistem Industri Vol. 3 No. 2 A,

Sulistyadi, K dan Basriman, I (2018), Sistem Produksi : Industri Manufaktur dan Jasa, Sekolah pascasarjana Usahid Press, Universitas Sahid Jakarta

Yustina Tritularsih dan Eko Liquiddanu, 2018, Simulasi Multi Produk Jalur Perakitan Untuk Meminimumkan Waktu Siklus Produksi, Seminar dan Konferensi Nasional IDEC Surakarta

Downloads

Published

2024-05-31

Issue

Section

Articles