ANALISIS PENGENDALIAN KUALITAS BENANG TCM 40’SK PADA PROSES WINDING MENGGUNAKAN METODE STATISTICAL PROCESS CONTROL DI PT. DELTA DUNIA TEKSTIL IV

Syahfara Ashari Putri Syahfara Ashari Putri; Halim  Qista Karima

doi:10.34151/rekavasi.v10i1.3713

Authors

Syahfara Ashari Putri Syahfara Ashari Putri Institut Teknologi Telkom Purwokerto
Halim Qista Karima Institut Teknologi Telkom Purwokerto

DOI:

https://doi.org/10.34151/rekavasi.v10i1.3713

Keywords:

Quality Control, Product Defect, Statistical Process Control, Fishbone Diagram

Abstract

PT Delta Dunia Tekstil IV is a company engaged in yarn spinning. The stages of the yarn production process include the blowing process, carding process, unilap process, combing process, roving process, ring spinning frame (RSF) process, winding process, and packing process. The problem that often occurs at PT Delta Dunia Tekstil IV is that there are still products that do not meet the specifications or standards set by the company in the production process, one of which is the winding process. Based on observations made on the winding process, the yarn that has the highest total defects with predetermined specifications is TCM 40'SK yarn, so it is necessary to carry out quality control analysis. from workpractice is to know product defects that often occur and to know the factors that cause and provide research on the causes of defects that occur. The method used is Statistical Process Control which aimsto analyze, control, manage, and improve a process or product. The highest types of defects in the production of TCM 40’SK yarn are neps defects of 66,00%, thickness defects of 31,63%, and thin defects of 2,37%. Based on fishbone diagram analysis, the causes of defects in yarn are from human factors, machines, raw materials, methods, and the environment.

References

Ahmad, F. (2019). Six Sigma DMAIC Sebagai Metode Pengendalian Kualitas Produk Kursi Pada UKM. 6(1), 11–17.

Ashary, Y. N., Kusnadi, K., Nugraha, A. E., & Hamdani, H. (2021). Usulan Perbaikan Kualitas Produk Benang Combed Dengan Metode Statistik Peta Kendali X Dan R. Journal Industrial Servicess, 7(1), 145–153.

Devani, V., & Wahyuni, F. (2013). Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control Di Paper Machine 3. Jurnal Ilmiah Teknik Industri (Jiti), 15, 87–93.

Kusumahadi, P. T. (2015). Analisis Kecacatan Produk Kain Cotton Di Departemen Printing Pada Pt . Kusumahadi Santosa Dengan Metode C- Chart. Lcl, 1–7.

Montgomery, Douglas C. (2002). Introduction To Statistical Quality Control. 4th Ed. John Wiley & Sons (Asia) Pte Ltd. Singapore.

Pitoyo, D., Akbar, A. R., Industri, P. T., Kaizen, M., & Pendahuluan, I. (2019). Analisis Pengendalian Kualitas Produk Dengan Metode Six Sigma Dan Metode 5 Step Plan Di PT . Pikiran Rakyat. 1(1), 1–13.

Saputro, D. T., & Kustanto. (2020). Evaluasi Hasil Produksi Dengan Metode Pengendali Mutu C-Chart Dan U-Chart Di Pabrik Generator Sets PT ABC. Jurnal Informa Politeknik Indonusa Surakrta, 6, 65–74.

Wijaya, T. B. (2020). Peningkatan Kualitas Imperfection Indicator (IPI) Benang P / C Ne 1 45 Pada Mesin Ring Spinning Toyoda Model Ry Dengan Setting Variasi. Jurnal Teknika Atw, 95–102.